Press "Enter" to skip to content

How to Clean Vintage Painted Wood Kitchen Cabinets

Vintage cabinets require careful cleaning, because abrasive cleaners chemicals and oils may harm the old painted finish and the wood can be damaged by excess quantities of water. Your cabinets that are classic wear of paint and may have a look that is faded and crackled from the oxidization. Typically, you should be able to retain your cabinets’ classic patina with simple dusting and cleaning with detergent and warm water. If the surface is fragile or dirty, speak to a professional furniture restorer for advice.

Dust Away

Even, and detergent water, may be damaging to wooden surfaces in large quantities, so it pays to clean cabinets with a cloth to see if it is sufficient. By using a soft cloth to gently remove dirt and dust particles from the cabinet 20, Initiate the cleaning procedure. Hard-to-reach places such as corners, trim and around fixtures may be cleaned with a vacuum cleaner and soft brush attachment, or with a soft toothbrush.

Water It Down

If persistent dirt and grime remains after dusting, try gently wiping cabinets . Start with dampening a soft cloth with clean water that is warm, and then clean the regions of the cupboard . Pressure carefully and only when required, and be careful not to use too much water. A toothbrush may be utilized to target catchy stains of buildup or hard-to-reach spots, but do not use anything more abrasive than that to wash.

Maintain It Mild

Make a solution of 1 tablespoon household detergent blended into a spoonful of warm water if cleaning with water isn’t enough. A small segment of the cupboard by massaging it dampened with the cleaning solution. The end does not look damaged with it and In case the solution can help to take out the dirt, use tiny sections of to clean at a time with the detergent solution. Use a cloth dampened with water to wash off any detergent when you’re finished.

Waxy End

After cleaning, you can employ a wax that is clear to your cabinets to help protect them from water damage or stains, as well as from scratches and dust. Use a soft cloth to apply a thin coating of clear adhesive wax in a circular movement. Allow the wax to dry, then use a clean cloth to buff the surface. Because these generally contain oils that harm the surface and could react with the paint do not use liquid waxes.

See related