Press "Enter" to skip to content

The best way to Plant Soft Leaf Yucca

Introduce a spectacular, tropical result right into a landscaping by including a delicate leaf yucca (Yucca recurvifolia). Also called weeping pendulous or yucca yucca, these names refer to the downward- . Since leaves aren’t erect and stiff, the sharp pointed suggestions are not as likely to cause damage. These crops do in Sunset’s Environment Zones 710 and 1224. and are indigenous to the south-eastern United States The New Sunset Western Gardening Guide characterizes this yucca as “simple to increase under all backyard problems.”

Siting the Plant

Locate an area which will have good soil drainage and full sun.

Measure the location to produce sure it could accommodate a plant 6 feet tall — up to 9-feet when flowering — and 5 feet wide. Add 3-feet across the whole plant to enable entry to prune dead leaves, undesirable side branches and spent flower-stalks. Check for buildings which may be influenced by the plant or over-head wires.

Inspect the website to ensure the plant isn’t in a depression. If required, generate a slope by subtracting or adding soil.


Acquire or purchase a little-sized Yucca recurvifolia, preferably 1 to 5-gallon dimensions. If a size that is larger is preferred, consider having it professionally installed.

Dig a hole twice the size of the root ball of the plant using a -nose shovel.

Put on gloves that are gardening and remove the plant. Backfill the bottom of the planting hole as when the plant was in the pot so the soil level stays the same, enabling room left to get a watering basin throughout the plant.

Place the yucca in the hole and orient it to be straight and upright . Fill in around the sides of the root ball. Create a berm across the edges of the hole using the left over s Oil therefore the plant might be watered.

Water the plant carefully.

See related