Paver bricks are a relatively cheap means to enhance the appearance of your driveway. If a driveway is too small, or when the landscaping across the driveway is broken from foot or vehicle traffic, then placing pavers may add dimension and definition to the area when protecting your landscaping. Pavers come in a variety of shapes, fabrics and colours, so select the design that is most appropriate for your lawn to accomplish a harmonious appearance.
Define the shape of the space which you intend to pave. With a piece of rope or, for more accuracy, a piece of chain attached to garden stakes, lay out the field which you need to pave. Because one side of this area will be characterized by the drive, it’s simply required to specify one side of this walkway.
Use a shovel to remove sod, plants, dirt or any other substance that sits in your defined area. Dig out the soil to 5 inches in addition to the height of your paver, starting your measurement in the height of this driveway.
Level out the area and place 3 inches of gravel. Employing a tamper or some piece of thick, flat timber, tamp the gravel down entirely until it no longer changes when you walk on it.
Pour 2 inches of sand on top of the gravel layer. Tamp and flat this layer using your tamper till the sand is business. Lightly sprinkle the area working with a garden hose to permit the substance to settle.
Lay the first row of pavers across the driveway edge, leaving the identical quantity of space between the drive and the pavers as you intend to depart between the openings themselves. Be careful not to press the pavers into the sand, because this will lead to an irregular walkway. Lay the pavers onto the sand.
Continue placing extra rows. The pattern that you choose is your decision, but it can help to lay out a couple of pavers in a complete pattern on the drive so that you can refer to it as you create your own pattern on the sand. If you have to reduce pavers to fit a curve or to fit into the routine, cut them using a handheld saw with a diamond blade.
Pour sand on top of the pavers once you’ve completed putting them. Use this sand to sweep . You might want to have someone hold the pavers in place as you sweep the sand to make sure that the bricks don’t change.
Sprinkle water over the full walkway or let a couple of days of rain to help settle the sand. Sweep further sand between the pavers as necessary before the sand is flush with the bricks and drive.